How To Maintain The Sewage Treatment Plant So As Not To Fail

During the use of the sewage treatment plant, some small faults occasionally occur, which affect the normal operation of the equipment. So, what should we do to prevent these small faults from happening? Today, environmental protection will answer it for you.

Sewage treatment plant

1. The pipeline valves of the sewage treatment plant should be regularly repaired and maintained, and hidden dangers should be eliminated in time.

2. If there is a power failure or switch off, the management personnel cannot leave the fan room, and should always pay attention to the situation to ensure the normal operation of the equipment.

3. The operator shall use the equipment in strict accordance with the basic operating specifications, so as to avoid damage to the equipment caused by operation errors.

4. When the COD is about 140-150mg/L, force exhaust air or put in an appropriate amount of oxidant, and take effective measures to reduce COD emissions.

5. Pay attention to adjusting the water level of the pool to ensure the normal operation of the sewage treatment plant

6. If the sewage outlet is blocked, take effective measures to clean it up in time to ensure the discharge of sewage from the sewage treatment plant and prevent sewage from escaping.

7. In the flood season, the sewage pipeline and single valve should be checked frequently. If the single valve fails, take effective measures to repair and replace it in time to prevent seawater from entering the sewage pool.

8. The fan should be replaced every 6 hours.

9. The sewage pump should be checked frequently, and the problem should be maintained in time to ensure the normal operation of the equipment.

https://www.biocell-enviro.com/