Sludge Dewatering Screw Press Fault Prevention

When we pass the polluted river bank, we can smell the rancid smell, especially in summer, the rancid smell will be stronger. This is the consequence of environmental pollution. Flies fly around in the sewage and can easily spread diseases. Therefore, we need to protect the environment and deal with sewage in time. Then we need to use the sludge dewatering screw press at this time.
The volute sludge dewatering screw press machine has many practical core technologies for sewage treatment, and can play a very good role in sewage treatment and sludge dewatering in our country. However, such devices can also be faulty. Today we will look at how to prevent the failure of the accumulation screw sludge dewatering machine and see how to deal with the failure.
1. Prevent Accidents
The screw shaft of the volute dewatering screw press is installed between the fixed ring and the swimming ring to work. The first half of the machine is the enrichment part, and the second half is the dehydration part. Sludge dewatering and compression can be done simultaneously. However, in daily operation, we should use the spiral stacker reasonably, maintain it in time, and do not use it for a long time. Most of the time, when people use the spiral stacker, there is no fixed maintenance time, and some maintenance methods are wrong. This is the whole reason for the failure of the spiral stacker, so we should be proactive to prevent this kind of thing from happening.
2. Settle Disputes
If the volute sludge dewatering screw press machine fails during operation, general operators cannot complete the maintenance, and it is necessary to call professional maintenance personnel for maintenance after sales. We cannot disassemble the sludge dewatering screw press by ourselves. We must report the operation to the supervisor in time, and let the supervisor contact the maintenance. If the after-sales service personnel cannot come temporarily, then we should ask experienced old employees to disassemble and repair according to the instructions. During the maintenance process, other personnel should not fold the parts of the spiral sludge dewatering machine at will to avoid losing parts.

https://www.biocell-enviro.com/