Ventilation of MBBR Sewage Treatment Plant

When MBBR sewage treatment plant is in use, especially in farms, ventilation is very important, so we should improve the ventilation of integrated sewage treatment equipment to make it better.

MBBR sewage treatment plant is used in large-scale factories mainly for breeding or slaughtering, and is mainly used to treat some daily sewage or wastewater. We require the sterilization room to be set up separately, using a glass fiber reinforced plastic centrifugal fan, the boost pressure should not be lower than 300mmH2O, and the negative pressure of the sterilization room should not be lower than 200mmH2O. The exhaust emissions of integrated sewage treatment equipment can generally be discharged at high altitude or connected to places far away from residential areas. The ventilation rate can be designed according to twice the air supply of the fan. The buried integrated sewage treatment equipment should be placed indoors or in the basement, and the indoor ventilation frequency should not be less than 30 times per hour.

What are the characteristics of the drainage system of MBBR sewage treatment plant: the buried integrated sewage treatment equipment is coordinated with the water supply system and flood drainage system in adjacent areas and regions; the reuse of the buried integrated sewage treatment equipment, and the reasonable disposal of sludge ; Possibility to accept industrial wastewater and conduct centralized treatment and disposal in coordination with the sewage and sludge treatment and disposal systems in adjacent areas; Properly renovate the original drainage engineering facilities to give full play to the engineering efficiency of the buried integrated sewage treatment equipment.

https://www.biocell-enviro.com/