Precautions for the use of volute screw press sludge dehydrator

The volute screw press sludge dehydrator does not require staff to actually operate the machine, and the operation is not likely to cause blockage, filter cloth deviation of the filter press, or other situations that endanger the safety of the process, and the daily maintenance is simple and easy; The overall design concept of the integrated sludge dewatering machine, the design concept is compact, and the operation cost is greatly saved. The low-speed spiral extrusion technology greatly reduces the power consumption, the equipment is not easy to block, the cleaning tap water is greatly reduced, and the 24-hour automatic unmanned operation is greatly reduced. Therefore, the stacked screw sludge dewatering machine is also It has truly formed a green and environmentally friendly new type of machinery and equipment that conforms to current policies.

1. Ensure that the spiral type is flexible and usable.
2. Before the actual operation, try to be familiar with the instructions of the screw stacking sludge dewatering machine, and have a basic familiarity with the screw stacking sludge dewatering machine.
3. Check whether the volume exceeds the device setting limit.
4. Run the control for 3-5 minutes, and check whether all components are normal!
5. During the running process of the silt machine, do not use braking tools to avoid accidents!
6. When the sludge machine is de-dried, attention must be paid to joint distribution to avoid vibration of the equipment!
7. If the blue tape of the watch from the mechanical equipment is hot and deviates, it should be stopped first, and the greasy feeling on the tape should be checked, and it should be wiped clean with ethanol or gasoline.
8. There is no need to prevent dirt from the machine cover! To use the stacked screw sludge dewatering machine, not only must you operate the basic practical operation and maintenance methods, but you must also be familiar with its safety issues as much as possible, so what basics must you understand? Knowledge.
9. When acquaintances carry out equipment maintenance, inform them before turning on the power supply.
10. Do not blindly trust the power switch or operate the device, only open the knife switch, and it is safe to have obvious short-circuit points. And put up the "reclosing is strictly prohibited, many people are at work" sign.
11. Minimize the actual operation of induction electrification, and the actual operation of induction electrification can be carried out after the person in charge of electricity consumption approves and measures are taken.
12. Check whether the safety device is complete, safe, flexible, and reliable.
13. All electrical equipment of the sludge treatment equipment should feel that there is electricity before it is determined that there is no electricity, and do not touch the electrical equipment at will.
14. Check the screws and tighten them to prevent them from falling off during use; check the control rods of the transmission device, and the electrical switch positions are in place without loosening.
15. Check whether all kinds of pipes and pipes are intact, and there are no running, popping, dripping, leaking or seeping.
16. Check whether the lubricating equipment is complete, precise, and reliable, the fuel pipe is unobstructed, and the oil level gauge is conspicuous, and lubricate and oil various transmission parts.

https://www.biocell-enviro.com/